A small gap in your chimney flashing can send water straight into your attic, walls, and ceilings, and the damage adds up fast. If you’ve been searching for chimney flashing repair near me, you’re probably already dealing with a leak or spotted rusted, cracked, or lifted flashing during a roof inspection. Either way, getting the right contractor matters more than getting the fastest one.
At Sunflowers Energy LLC, we handle residential and commercial roofing repairs daily, including chimney flashing issues caused by storms, age, and poor original installations. That hands-on experience gives us a clear picture of what separates a quality flashing repair from a temporary patch job, and what you should actually expect to pay for it. We put together this guide to help you make an informed hiring decision, not just pick the first name that pops up in a search.
Below, you’ll find 8 of the best chimney flashing repair companies, what they charge, what to look for before signing a contract, and how to avoid overpaying. Whether your flashing needs a simple reseal or a full replacement, this breakdown covers the details you need to move forward with confidence.
1. Sunflowers Energy LLC
Sunflowers Energy LLC is a residential and commercial roofing company that handles chimney flashing repair as part of a complete roof service offering. If you’re searching for chimney flashing repair near me and want a contractor who treats the repair as part of your roof’s overall health rather than an isolated fix, Sunflowers Energy LLC is a strong place to start.
Best for
Sunflowers Energy LLC is best suited for homeowners and business owners who want a single contractor to handle roofing and flashing work together. They serve both residential and commercial properties, and their storm damage restoration experience means they understand how flashing failures connect to broader water intrusion problems across the roof system.
What to expect from the service
When you contact Sunflowers Energy LLC, the process starts with a free on-site inspection and no-obligation estimate. A technician visits your property, evaluates the flashing condition, checks for related roof damage, and explains the findings before any work begins. They use superior materials and focus on durable repairs rather than temporary sealant patches that fail within a season or two.
A proper chimney flashing repair addresses both the metal flashing and the sealant or mortar securing it – fixing one without the other leads to repeat leaks and higher long-term costs.
Your flashing damage may also qualify for insurance coverage if a storm caused it. In that case, Sunflowers Energy LLC provides insurance claim assistance, helping you document the damage and work through the process so the paperwork doesn’t fall entirely on you.
Typical pricing
Costs depend on the scope of the repair. Simple reseal jobs typically run between $150 and $400, while partial or full flashing replacements can range from $400 to $1,500 or more, depending on chimney size, roof pitch, and material type. If your damage qualifies for an insurance claim, your out-of-pocket cost can drop significantly after the deductible.
Questions to ask before you hire
Before you commit, get clear answers to these questions so you can compare quotes accurately and avoid surprises later:
- Does the estimate cover both labor and materials?
- Will you replace the flashing entirely or just reseal the existing metal?
- What flashing materials do you use, and are they compatible with my roof type?
- Do you provide a warranty on the repair work?
- Can you assist with an insurance claim if the damage qualifies?
2. Angi
Angi (formerly Angie’s List) is a contractor marketplace that connects homeowners with local service providers, including roofers and chimney specialists. If you’re searching for chimney flashing repair near me but aren’t sure which local contractors operate in your area, Angi gives you a starting point with reviews and quotes from multiple professionals in one place.
Best for
Homeowners who want to compare multiple local contractors before committing to one will get the most value from Angi. The platform lets you browse service providers, read verified customer reviews, and request quotes from several businesses at once, which is helpful if you’re early in the hiring process.
What to expect from the service
Angi connects you with local contractors rather than performing the repair itself. You submit a project request, and professionals in your area respond with quotes. Response times vary depending on your location and contractor availability. The platform displays ratings and past reviews, which can help you shortlist candidates before reaching out directly.
Always verify a contractor’s licensing and insurance independently before signing any agreement, even if they appear on a vetted platform.
Typical pricing
Pricing through Angi varies because individual contractors set their own rates. Chimney flashing repairs sourced through the platform typically fall within the same broad market range: $150 to $1,500, depending on the scope of the repair and the materials involved.
Questions to ask before you hire
Before you hire through Angi, get clear answers to these:
- Is the contractor licensed and insured in your state?
- Do they specialize in roofing and chimney work, or is flashing a secondary offering?
- What does the quote include, and are there any additional fees after the initial estimate?
3. Thumbtack
Thumbtack is a service marketplace that connects homeowners with local professionals across hundreds of project types. If you’re already searching for chimney flashing repair near me, the platform lets you find and contact local contractors directly without going through a lengthy referral process.
Best for
The platform works best for homeowners who want fast, direct access to local contractors and prefer reaching out to professionals on their own terms rather than waiting for a callback. You can filter by location, read customer reviews, and compare multiple contractors before committing to anyone.
What to expect from the service
Unlike a traditional referral service, Thumbtack doesn’t vet contractors before listing them. You describe your project, and local pros respond with quotes, or you can reach out to contractors directly from their profiles. Some list pricing ranges upfront on their profiles, which gives you a baseline before the first conversation even starts. Response times tend to be faster than calling around individually, but quality still varies by contractor.
Check how many completed jobs a contractor has logged on their Thumbtack profile and look for reviews that specifically mention roofing or chimney work, not just general repairs.
Typical pricing
Pricing depends on the contractor you choose through the platform. Chimney flashing repairs typically fall in the $150 to $1,500 range, consistent with market rates across most regions.
Questions to ask before you hire
Before you book anyone through Thumbtack, confirm:
- Are you licensed and insured for roofing work in my state?
- Is chimney flashing a service you perform regularly, or only occasionally?
- What does your estimate include, and will the price change after the on-site visit?
4. A local roofing contractor
A local roofing contractor is often the most straightforward option when you need chimney flashing repair near me handled quickly and without a lot of back-and-forth. Most residential roofers have direct experience with flashing installation and repair because it’s a standard part of any roof job, which means you’re hiring someone who works on this type of problem regularly.
Best for
Homeowners who already have a trusted local roofer or who want a contractor that can evaluate the entire roof during the same visit will get the most value here. A local roofer can spot related damage around vents, skylights, and valleys while they assess the chimney flashing, which saves you from booking a second appointment later.
What to expect from the service
Most local roofing contractors will schedule an on-site estimate before starting any work. They’ll assess whether the existing flashing needs a reseal or a full replacement, check the surrounding shingles for water damage, and give you a written scope of work. Quality contractors will explain exactly what failed and why before touching anything.
Ask whether they pull a permit for flashing replacement in your area, since some municipalities require it for structural roof repairs.
Typical pricing
Local roofers generally charge $150 to $500 for a straightforward reseal and $400 to $1,500 for a full flashing replacement, depending on chimney size and roof complexity.
Questions to ask before you hire
- Are you licensed and insured for roofing work in this state?
- Do you warranty both labor and materials on flashing repairs?
- Will you provide a written estimate before starting?
5. A chimney and fireplace service company
A chimney and fireplace service company focuses specifically on the entire chimney system, from the firebox at the bottom to the flashing and cap at the top. When you need chimney flashing repair near me handled by someone who understands how the chimney interacts with your roof as a complete system, these specialists bring focused experience that general roofers sometimes lack.
Best for
Homeowners with older masonry chimneys or those dealing with multiple chimney issues at once will get the most value from a dedicated chimney and fireplace company. If your flashing repair comes alongside concerns about the chimney crown, mortar joints, or liner, these companies can address all of it in a single visit rather than requiring you to coordinate two separate contractors.
What to expect from the service
A chimney and fireplace company typically starts with a top-to-bottom chimney inspection before touching the flashing. They check the crown, cap, mortar, and internal liner condition while evaluating where the water intrusion originates.
Flashing failure and chimney crown damage often appear together, so a specialist who can assess both saves you from scheduling two separate service calls.
Their written repair estimate will typically break down each issue separately, letting you prioritize repairs based on urgency and budget.
Typical pricing
Flashing repairs through a chimney company generally run $200 to $1,200, depending on the extent of the work. Bundling additional repairs into the same visit can reduce your overall cost compared to booking each issue individually.
Questions to ask before you hire
- Do you repair the flashing itself, or do you subcontract that roofing work to another crew?
- Are your technicians certified in chimney repair?
- What does the inspection cost, and does that fee apply toward the repair total?
6. A CSIA-certified chimney sweep
A CSIA-certified chimney sweep holds credentials from the Chimney Safety Institute of America, the nationally recognized body that sets training and safety standards for chimney professionals. When your chimney flashing repair near me search keeps returning general contractors with limited chimney knowledge, a CSIA-certified technician brings focused expertise in chimney systems and water management that most roofers simply do not have.
Best for
Homeowners dealing with recurring leaks or undiagnosed water intrusion get the most value from a CSIA-certified sweep. These professionals are trained to identify exactly where water enters a chimney system, which means they can separate a flashing failure from a crown crack, a deteriorated cap, or a combination of issues that general roofers sometimes miss.
What to expect from the service
CSIA-certified sweeps typically start with a detailed chimney inspection that follows industry safety standards before recommending any repairs. They assess the flashing, mortar joints, crown, and cap as a complete system rather than isolating one component. Some sweeps partner with roofers for the metal flashing work itself, so confirm whether they handle that portion in-house or coordinate with a separate crew.
Ask for their CSIA certification number upfront so you can verify credentials directly before scheduling any work.
Typical pricing
Expect to pay $100 to $300 for an initial inspection, with flashing repair costs ranging from $200 to $1,000 depending on what the inspection uncovers and whether a separate roofing crew handles any portion of the job.
Questions to ask before you hire
Before you book a CSIA-certified sweep, make sure you get clear answers to these questions:
- Can you provide your CSIA certification number for verification?
- Do you handle flashing repairs in-house, or does another crew complete that portion?
- Does the inspection fee apply toward any repair work you authorize?
7. A masonry contractor for chimney brickwork
A masonry contractor specializes in brick, mortar, and stone work, making them a strong choice when your chimney flashing repair near me search reveals that deteriorating brickwork is part of the leak problem. Flashing failures often overlap with cracked mortar joints or spalling bricks, and a masonry contractor handles those structural repairs that a standard roofer typically will not touch.
Best for
Homeowners dealing with visible brick damage, crumbling mortar joints, or a structurally compromised chimney will get the most value from a masonry contractor. If the brickwork around your flashing has deteriorated, fixing only the metal and sealant leaves the underlying structural problem unresolved, and the repair will fail again within a short time.
What to expect from the service
A masonry contractor will inspect the full chimney structure from the roofline up, assessing mortar joint condition, brick integrity, and how the flashing ties into the masonry. They typically perform tuckpointing to restore weakened mortar joints and replace damaged bricks before any flashing work gets sealed against the chimney surface.
Flashing sealed against deteriorating masonry will fail again quickly, so addressing the brickwork first protects your repair investment long-term.
Typical pricing
Masonry chimney repairs generally run $300 to $2,500, depending on the volume of tuckpointing needed and whether any bricks require full replacement. Flashing work itself may be handled by a roofer they coordinate with, so confirm that arrangement before any work starts.
Questions to ask before you hire
- Do you handle both the masonry repairs and the flashing, or do you subcontract the roof-side work?
- Are you licensed and insured for structural chimney repairs?
- Will you provide a written breakdown separating masonry and flashing costs?
8. A storm restoration roofer for leak damage
When a storm triggers your chimney flashing repair near me search, a storm restoration roofer is often the most practical contractor to call first. These specialists work directly with insurance carriers and adjusters, which means they understand how to document storm-related flashing damage in a way that supports a successful claim rather than one that gets denied over missing evidence.
Best for
Storm restoration roofers are best suited for homeowners whose flashing damage resulted from wind, hail, or heavy rain. If your leak appeared after a weather event, this type of contractor can connect the damage to a specific cause, which is exactly what your insurance company needs to process the claim and approve repair or replacement costs.
What to expect from the service
A storm restoration roofer starts with a detailed damage assessment that documents every affected area, including the flashing, surrounding shingles, and any water intrusion points. They photograph and report findings in a format that aligns with insurance adjuster requirements, which reduces delays during the claim process. Many work on a timeline that matches insurance approval windows, so repairs stay on track without you managing the paperwork alone.
Confirm that any storm restoration roofer you hire carries both general liability insurance and workers’ compensation coverage before they step onto your roof.
Typical pricing
Your out-of-pocket cost depends on your deductible and what the insurance company approves. Without coverage, storm flashing repairs typically range from $300 to $1,500 based on the extent of the damage.
Questions to ask before you hire
- Do you handle the insurance documentation and adjuster coordination directly?
- Are you licensed and insured for roofing work in my state?
- What happens if the insurance claim gets denied, and will you still provide repair options?
Quick wrap-up
Finding the right contractor for chimney flashing repair near me comes down to matching your specific situation to the right type of specialist. A straightforward reseal calls for a different hire than storm damage requiring insurance documentation or structural brickwork needing a masonry expert. Each option in this list serves a distinct need, and knowing which one fits your situation saves you time, money, and repeat repair calls down the road.
Before you commit to anyone, get a written estimate that breaks down labor, materials, and warranty terms so you can compare quotes on equal footing. If your damage ties back to a storm, ask about insurance assistance before you pay anything out of pocket.
If you want a contractor who handles roofing and flashing as part of a complete roof system, request a free inspection from Sunflowers Energy LLC and get an honest assessment before any work begins.
